Descrição do barco
FOR SALE PROJECT "WEDGELINE 77" INCLUDING THE FOLLOWING: design documents, aluminum hull to be completed, N° 2 engines built 2023 Man Type D 2862 LE 476 - V12-1900 HP, N° 2 propellers, N° 2 shafts and N° 2 rudders year 2023, in addition to the registered trademark "Fabiani Yacht". LIST OF GOODS AVAILABLE ON REQUEST.
Descrição do armamento
Gearbox: 2 x ZF 3060 V 1:3,280
Generators: 2 x 21 kW Köhler EFKOZD 50 Hz
- Accessory black box, BE 6.2 ISEA black box
- Standard oil sump, Electric sump oil drain pump, Lubricating oil pump (standard version)
- Engine oil filters
Exhaust gas compensator, Exhaust gas elbow with vertical outlet, Water-cooled exhaust gas manifold, Heat exchanger (titanium plates) and simple sea water pump, compensation tank, Sea water pump, rigid supports Oil pressure transmitter in mA, Low oil pressure alarm for inverter, High oil temperature alarm for inverter
- Terminal board mounted, including normal wiring with 24 V start-up blocking relay, mounted with display, connection cable between SN engine terminal board, central engine and terminal board RH engine, (MMDS CAN Bus) mt. 5 Color LCD - Display Unit (2 units) - 7" display for dashboard, including sensors, Terminal board - dashboard display connection cable 30 m, Power and engine start cable (MMDS CAN Bus) 20 m, High efficiency fuel separator filter (switchable), supplied separate from the engine to be mounted, Fire resistant with 1.5 m connection sleeve. Fuel filters, Air filters, Power take-off on the engine (max. torque 180 Nm), Belt protection casing
- IMO technical documentation, "Service" documentation on CD, Bench test reports with certification of the crankshaft and connecting rods,
- Avri 50 D in the box
- Megiflex B 1742 A in the box
- Vulkardan joint in the box
ITALIAN PROPELLERS propellers and shafts
- No. 2 Propeller shafts 5370 mm complete with locking ring keys and crown nut side propeller
- No. 2 Coupling flanges complete with 18 bolts complete with nuts and washers each
- No. 2 External casing tubes to be welded I. 2100 mm.
- No. 2 Internal casing tubes length 2285 mm complete with bushing and half bushing at the bow with attachment
- No. 2 Mechanical seals
- No. 2 Propeller shaft supports h 715 mm complete with 10 screws, bushing, plate and backplate each
- No. 2 Rudder bushings I. 5500 with flange to be welded thickness 20 diameter 270
- No. 4 Rudder bushings
- No. 2 Boxed rudders with lever
- No. 2 Ext. sacrificial zinc 200
- N. 2 Nibral propellers 5 blades diameter 1050 hole 100.
Transformer
- Transformer 3-1 phase h20 60kva IP23 Painted red nickel-plated copper transmissions
Mais detalhes
Class notation: CE Class A
Speed
Maximum: up to 27 knots
Cruising: up to 24 knots
Autonomy at 24 knots: 200 nautical miles (~8 h)
Fuel capacity: 6,000 lt
Fresh water capacity: 1,000 lt
Grey and black: 1,000 lt